Making the Settings Related to the Orientation of the Original and Scanned Sides817Note❒ If the final page of a dividedoriginal is blank, you canskip scanning that page. Todo this, select [1 Side] in [LastPage] in [2 Sided Original]. Toscan the blank page, click [2Sides]. For details, see p.79“One-sided original/Two-sided original selection”.Specifying StampingA To stamp scanned originals,press [Divide / Stamp], and then[Stamp].Note❒ Last pages are stamped evenif you selected not to scan thelast page.❒ Stamping may continue ifscanning is interrupted, de-pending on the cause of in-terruption.❒ Replace the stamp cartridgewhen the stamp begins tofade. For details, see “Trou-bleshooting”, General SettingsGuide.B Press [OK].C Press [OK].Note❒ The current settings are displayed.For a Network TWAIN ScannerWhen using the network TWAINscanner, make the setting using theTWAIN Driver.A Open the Scanner Properties dia-log box.Referencep.74 “Scanning Originals”B Select the position from the [Origi-nal Scan Method:] list.C Select [ ] or [ ]from the [Orig.Orientn.:] list.Referencep.117 “Placing Originals”D In the [Orientation:] menu, select[ / ],[ / ],[ / ], or[ / ].E When the originals are placed inthe ADF, select [1 Sided] , [2 Sid-ed(Top to Top)] or [2 Sided(Top to Bot-tom)] in the [Scan Settings:] list.Note❒ Originals of different sizes arescanned differently, dependingon the settings. See. p.119“Scanning Documents of Differ-ent Sizes”.
