Sending Scan Files by E-mail272❒ To interrupt scanning, press the{Clear/Stop} key or press [Stop]on the display panel.❒ When placing multiple origi-nals one-by-one, place the nextoriginal. For details, see p.82“Scanning Originals in SeveralTimes”.Simultaneous Storage andSending by E-mailYou can use the e-mail function andthe storage function together.The scan file is sent by e-mail and atthe same time is stored.Note❒ This section explains mainly theprocedure for simultaneous stor-age and sending of e-mail. For de-tails, see p.17 “Procedure forSending E-mail”.❒ The file stored when simultane-ously storing a file and sending itby e-mail cannot be resent in the e-mail screen. To resend the file, se-lect the file in the [Select Stored File]screen and send it. See p.54 “Send-ing Stored Files by E-mail or Scanto Folder, or Delivering”.A Place originals.Note❒ The procedure for placing origi-nals is the same as that for plac-ing originals for copying. Fordetails about placing originals,see “Placing Originals”, CopyReference.B Make settings for original orien-tation, the sides scanned, and oth-er settings if necessary.Referencep.79 “Making the Settings Relat-ed to the Orientation of theOriginal and Scanned Sides”C Make the scan settings.Note❒ There are two ways to specifyscan settings, as described be-low:• Configure each setting forscanning. For details, seep.77 “Specifying Scan Set-tings”.• Recall registered settings. Fordetails, see p.86 “Recalling aProgram”.D Specify the destination.E Specify the sender and a subject.F Press [Store File].G Make sure [Send & Store] is select-ed.
