Lanier LD225 Function Manual

Also see for 8025: Network guide Function guide Fax guide Operating instructions Settings guide

Contents

Lanier LD225 Function Manual Manual pdf 103 page image

Accessing User Tools (Copier/Document Server Features)934Accessing User Tools (Copier/DocumentServer Features)This section is for key operators incharge of this machine. With UserTools can change the machine's de-fault settings.Note❒ Be sure to exit User Tools and re-turn to the initial copy display af-ter all settings are finished. Thissection describes system settingsyou can set for the copier function.❒ The selected key is highlighted.❒ Any changes you make with UserTools remain in effect even if themain power switch or operationswitch is turned off, or the {ClearModes} key is pressed.ReferenceFor details, see "Changing DefaultSettings" in "User Tools (SystemSettings)", General Settings Guide.Changing Default SettingsA Press the {User Tools/Counter} key.The User Tools main menu ap-pears.B Press [Copier/Document Server Fea-tures].The Copier/Document Server Fea-tures menu appears.C Select the menu you want to set.The setting display for each menuappears.Referencep.87 “User Tools Menu (Copi-er/Document Server Features)”D Change settings by following theinstructions on the display panel,and then press [OK].Exiting User ToolsA After changing default settings,press [Exit] on the User Tools mainmenu.Changes to User Tools are com-plete, and the machine is ready tocopy.Note❒ You can also exit User Tools bypressing the {User Tools/Coun-ter} key.