Lanier LD225 Function Manual

Also see for 8025: Network guide Function guide Fax guide Operating instructions Settings guide

Contents

Lanier LD225 Function Manual Manual pdf 30 page image

Copying202-How to operate❖ To stop the machine during a multi-copy run.Press the {Clear/Stop} key.❖ To return the machine to the initialcondition after copying.Press the {Clear Modes} key.❖ When clearing entered values.Press the {Clear/Stop} key or [Clear]on the display.❖ To check the settings.Press the {Check Modes} key.Interrupt CopyUse this function to interrupt a longcopy job to make urgently neededcopies.Limitation❒ You cannot use Interrupt Copywith the scanner function, or whenfax originals are being scanned.A Press the {Interrupt} key.The Interrupt indicator lights.When the originals stop scanningA Remove the originals that werebeing copied, and then placethe originals you want to copy.B Press the {Start} key.Copying starts.C When copying is complete, re-move the originals and copies.D Press the {Interrupt} key again.The Interrupt indicator goesout.E When the display prompts you,place the former set of origi-nals again.F Press the {Start} key.Note❒ The former copy job's set-tings are restored and themachine continues copyingfrom where it left off.When the machine keepscopyingA Place the originals you want tocopy.B Press the {Start} key.The machine stops the previousjob and starts copying the neworiginals.C When copying is complete, re-move originals and copies.D Press the {Interrupt} key again.The Interrupt indicator goesout.The former copy job's settingsare restored and the machinecontinues copying from whereit left off.Left Original BeeperThe beeper sounds and an error mes-sage appears if you leave originals onthe exposure glass after copying.Note❒ See p.96 “Tone: Original remains”.