Lanier LD225 Function Manual

Also see for 8025: Network guide Function guide Fax guide Operating instructions Settings guide

Contents

Lanier LD225 Function Manual Manual pdf 49 page image

Copier Functions392❒ If you have incorrectly en-tered the ratio, readjust it us-ing [n] or [o].D Press [Vertical].E Adjust the ratio using [n] or[o].F Press [OK].D Press [OK].E Place originals, and then press the{Start} key.Directional Size Magnification(inch)A suitable reproduction ratios is auto-matically selected when you enter thehorizontal and vertical lengths of theoriginal and copy image you require.1. Horizontal original size2. Vertical original size3. Horizontal copy size4. Vertical copy sizePreparationSpecify the vertical and horizontalsizes of the original and those ofthe copy, as shown.Note❒ You can enter sizes within the fol-lowing ranges:A Press [Reduce/Enlarge].B Press [Specifd. Ratio].C Press [Dir. Size Mag in].D Enter the horizontal size of theoriginal using the number keys,and then press [#].E Enter the horizontal size of thecopy using the number keys, andthen press [#].F Enter the vertical size of the origi-nal using the number keys, andthen press [#].G Enter the vertical size of the copyusing the number keys, and thenpress [#].Note❒ To change a length, press thekey you want to change, andthen enter the new value.H Press [OK] twice.I Place the originals, and then pressthe {Start} key.CP2M01EEMetricversionVertical: 1–999 mm(increments of 1 mm)Horizontal: 1–9999 mm(increments of 1 mm)Inchversion0.1"–99.9" (increments of 0.1")