4: Network SettingsxPico® Wi-Fi® Embedded Device Server User Guide 29Using XML Not applicable.Table 4-8 WLAN Quick ConnectWLAN Quick ConnectSettingsDescriptionNetwork Name (search field) Enter a network name and click Scan to search for a network.Scan “” Perform a scan for devices within range of the xPico Wi-Fi. Including theoptional network SSID limits the scan to devices configured with thespecified network SSID. Omitting the network SSID performs a scan for alldevices in range.Network Name (link) Lists the SSID of a network. Click a specific Network Name to display theQuick Connect profile. If you provide the Password for a specific QuickConnect Profile, you can add that profile to your list of WLAN Profiles. Upto four WLAN profiles may be added, and only one may be connected atany given time.BSSID Lists the basic service set identifier. This is a unique 48-bits address thatidentifies the access point that creates the wireless network.CH Provides the channel number of a network.RSSI Displays an instantaneous value indicating the signal strength of thenetwork. The best to worst signal strength is indicated by green, yellow andred respectively.Note: RSSI reported in scan results is a single sampling.Security Suite Lists the security suite of a network (e.g., WEP, WPA, WPA2).
