5: Interface SettingsxPico® Wi-Fi® Embedded Device Server User Guide 31To Configure Line SettingsNote: The following section describes the steps to view and configure Line 1 settings;these steps apply to other line instances of the device.Using Web Manager To configure a specific line, click Line in the menu and select Line 1 -> Configuration(Table 5-1).Using CLI To enter the Line command level: config -> Line Using XML Include in your file: name = "Line" instance = "1">To View Line StatusUsing Web Manager To view statistics for a specific line, click Line in the menu and select Line 1 -> Status.Using CLI To enter the Line command level: status -> Line Using XML Look for the status header: = "Line" instance = "1">Xoff Char Specify the Xoff Character which is used when Flow Control is set toSoftware. Set the prefix in one of the three ways: Prefix decimal with prefix hexadecimal and 0x Prefix hexadecimal with 0x Prefix as a single control character with Gap Timer Set the Gap Timer delay to Set the number of milliseconds to pass from thelast character received before the driver forwards the received serial bytes.By default, the delay is four character periods at the current baud rate(minimum 1 msec). Gap Timer range is 1 to 5000 milliseconds.Threshold Set the number of threshold bytes which need to be received in order for thedriver to forward received characters. Default value is 56 bytes.Line Settings Description
