11: MonitorxPico® Wi-Fi® Embedded Device Server User Guide 59Access the configuration options displayed in Table 11-6 on the Data page. These configurationfields are the same ones in Step 4: Pick Data if utilizing Explorer.Table 11-6 Monitor Data SettingsTo Configure MonitorThe easiest way to view monitor status or modify monitor settings is through Web Manager,however you can also utilize the CLI and XML.Using Web Manager To view monitor status or modify monitor settings, go to Monitor on the menu.Using CLI To enter the Monitor command level: config -> MonitorUsing XML Include in your file: name = "Monitor" instance = “1”> Include in your file: “1”> Include in your file: name = "Monitor Control" instance = “1”> Include in your file: name = "Monitor Poll" instance = “1”> Include in your file: name = "Monitor Filter" instance = “1”> Include in your file: name = "Monitor Data" instance = “1”>Data Settings DescriptionSelector Click the Edit link to edit a specific selector. Three selector configuration fields willopen for this selector. When you begin entering information in these fields,additional Selector options become available containing the threeselector configuration fields which will also open upon clicking Edit. Complete theSelector fields: Name: define the data name as it will display. Response: set the response instance source of data. Response instancecorresopnds to poll or control message instance. Reference: select the output of the monitor filter. For instance, if data shouldselect the second trunk of data created by filter 1, the reference must be set to1.2. A Reference of 0 indicaets the raw response.
