Proline Low-temperature Thermostats114 Maintenance YACE0072 / 21.08.079 Maintenance9.1 CleaningWithdraw the equipment mains plug before cleaning.Cleaning can be carried out with water to which a few drops of surfactant (washing-up liquid) have beenadded and using a damp cloth.No water must enter the control section. Carry out appropriate decontamination if hazardous material is spilt on or in theequipment.The cleaning or decontamination method is determined by the user's specialistknowledge. In case of doubt, contact the manufacturer.9.2 Device statusThe thermostat can be conveniently checked with the Command Console. Some values can howeveralso be interrogated in the Master version.9.2.1 Interrogating the device typeÆ LMDkt Æ O@pA- Æ rXOF - Ì Section 7.6.4Æ Settings Æ Device status Æ Device typeWith low temperature thermostats, the device type is detected automatically and cannot be changed.9.2.2 Software versionÆ LMDkt Æ RgmVW Æ TDp Ì Section 7.6.8.Here, only the version of the control system in the Master is displayed.Æ Settings Æ Device status Æ Software version .With the Command Console the versions of the control system ( Control ), safety system ( Safety ),Command Console ( Command ), cooling system ( Cool ) and, where applicable, other connectedmodules are displayed.9.2.3 Serial numbersÆ LMDkt Æ RgmVW Æ Rlp G and Rlp K Ì Section 7.6.8.Under Rlp G the first five places of the ten-character serial number of the Master device are displayed.Under Rlp K the last five places are shown.Æ Settings Æ Device status Æ Serial numbers .With the Command Console the serial number of the Master ( Master ), Command Console( Command ), cooling system ( Cool ) and other connected modules are displayed.
