Proline Low-temperature ThermostatsYACE0072 / 21.08.07 Starting up 857.12 Timer function (Command)Using the timer function, the thermostat can carry out an action at a certain time or after a certainwaiting period. The actions are: switching on the thermostat, entering the standby mode or one of the 5programs in the programmer.Command Clock Timer 1 Timer 2− Open the device parameter menu via thesoft key Menu .− With the cursor keys continue to:Æ Clock Æ Timer 1 ,− or to Timer 2 ,− with the menu Status the selected timeris switched off or on .− The standby key does not stop the timer!Please exercise caution when thermostat is in standby mode.A previously activated timer mode could unintentionally start the thermostat againfrom the standby mode.The menu Function is used to define whenan action is executed:− Similar to an electronic mains timer,Weekplan enables two switching eventsto be carried out each day. The cycle isrepeated after 7 days.− Time absolute defines a time and a dateon which a once-only action (switchingevent) occurs. The time point is set withSet time and with Set date .− Time relative defines a waiting periodafter which a once-only action occurs.With Set time up to 99h: 59min can beentered. ("Set date" is masked out withthis function selection.)− If the Weekplan is activated, in thiswindow only Status , Function andWeekplan are displayed.Help Menu End Tset TfixSet timeSet dateTimer 1Timer 2Format of datePumpSettingsGraphClockProgrammerInterfacesControlLimitsHelp Menu End Tset TfixWeekplanTime absoluteTime relativeStatusFunctionActionSet TimeSet Date
