Proline Low-temperature ThermostatsYACE0072 / 21.08.07 Starting up 57Command Control Variable− Open the device parameter menu with thesoft key Menu .− With the cursor keys, change further toÆ Control Æ Control Variable .− Internal is currently active.− Select other control variables (onlydisplayed when present) with orand confirm with or End ,− or quit the window with without makingany changes.7.7.5 Current consumption from the mainsIf your mains fuse is rated below 16 A, the current consumption can be reduced in steps from 16 A to10 A using this function. Of course, the maximum heating power of 3.5 kW is then also reducedaccordingly. Take into account whether other loads are still connected to the fused circuit or whetheryour Proline Thermostat is the only load.orChange temperature probe source:− 0 for the internal probe,− DO only when an external probe is connected,− D@ only when an analog module is connected and configured,− DR only when a serial module is connected and is continuouslyreceiving actual values from a PC.Wait 4 seconds or − Display flashes 4 s Æ new value is automatically accepted, or− Value is immediately accepted with Enter key.− If DO D@ or DR has been selected,then the green LED indicates that the control has regulated tothe external temperature signal.Help Menu End Tset TfixInternalExternal Pt100Analog moduleDigital moduleControl Variable01!34 °C
