Leightronix LabVault-SD Installation, Configuration, And Operation Manual
                                       | |
Contents
| 
LABvault-SDWeb InterfacePage 17 2018-06-08• Files manually transferred from an external control system will be automatically deleted offthe LABvault-SD’s hard drive, regardless of whether or not the “Automatic Delete” settinghas been selected in the Web interface.• “File Quality”: select a “File Quality” recording preset for your files. Each recording quality preset represents therange of bit rates within which the file will be recorded.NOTE: If you selected a LEIGHTRONIX streaming Web site (“Internet VOD Streaming”) as an automaticfile transfer destination, your files will be recorded at the “Streaming” setting for all selected filedestinations. The “Good,” “Better,” and “Best” file record quality settings will be ignored.• “PEGcasting”: if you want your LABvault-SD files transferred to your NEXUS series server 15 seconds after thefiles begin recording, select the “Enable” “PEGcasting” option. To use the PEGcasting Next to Live autoplay featurefor simulated live broadcasting, you must still complete the “PEGcasting N2L” configuration settings on the “NEXUS/UltraNEXUS” tab.• “Closed Captions”: Select the “Enable Closed Captions” option to capture any closed caption data from the source.Closed captions are hidden in the video signal and decoded for display on televisions with built-in decoders ortelevisions connected to external decoders.Recording from the Web InterfaceStart/Stop recording and add index points to your files through the LABvault-SD’s Webinterface as follows:1. From the “MPEG Recorder” panel under the menu buttons or from the “MPEG EngineControl” panel on the bottom of the “File Management” screen, click the record buttonto begin recording.2. LEIGHTRONIX LGX-SVOD and Internet VOD Streaming Service Users Only: add videoindex points for use in PEG Central or other LEIGHTRONIX VOD streaming application.Index points appear as links next to the published video in the streaming application’splayer window, allowing viewers to quickly move to points of interest within the video.Either enter a custom name (20 characters maximum) for your index points intothe name field below the “Stop” record button or leave it blank and the LABvault-SD will use the current date/time as the name. Each index point also indicates thehours:minutes:seconds into the video that it marks. When you have chosen your namingmethod, click the “Set Index” button to add an index point to the recording file. Createadditional index points at key intervals in the recording with each click of the “Set Index”button. If a custom name was entered, each additional index point will be assigned thesame custom name until the name field is reset. To add an index point with a new customname, click the “Clear Index” button and then type a new name into the name field beforeclicking the “Set Index” button.3. To end the recording session, click the stop recording button. If a file destinationwas configured and enabled in the Web interface, your recorded file will be automaticallytransferred to the destination.Left Column“MPEG Recorder” Controls“MPEG Engine Control” PanelRecord ButtonStop Button |
Related manuals for Leightronix LabVault-SD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine