Leightronix LabVault-SD Installation, Configuration, And Operation Manual
                                       | |
Contents
| 
LABvault-SDFront PanelPage 3 2018-06-08KEYPADThe four LABvault-SD arrow keys are used to display status information as well as for the entry of TCP/IP networkaddresses. If you hold down an arrow key for more than one second, it begins to scroll through all of the availableoptions. Release the key when the desired option is displayed.The front panel keypad also turns the LABvault-SD on/off. Note that the LABvault-SD automatically turns on when theunit is plugged in. When held for four seconds, the red “X” button turns offthe LABvault-SD. If the LABvault-SD has been turned off, press the greencheck push button for two seconds to turn the unit back on.LEDSThe LABvault-SD front panel has two status, light-emitting diodes (LEDs)for at-a-glance feedback. The red “Record” LED lights up when the LABvault-SD is encoding. The blue “Play” LEDlights up when playback on the LABvault is activated.DISPLAYThe LABvault-SD display shows status and password-protected TCP/IP address entry screens. Once the LABvault-SD has been booted up, press the up or down arrows on the keypad to display the following status screens:11/03 12:00:00PMSN:B923D1 V01.00Serial Number & Firmware VersionFirmware Date IP AddressLABvault-SD Identification11/03 12:00:00PMFW Blt:10/31/0811/03 12:00:00PMIP:10.9.0.111/03 12:00:00PMID:LABvault-SDMPEG Recorder Status11/03 12:00:00PMRecorder StoppedBios Date11/03 12:00:00PMBios:02/14/08FRONT PANELBEFORE unplugging orremoving power from theLABvault-SD, shut down theunit from its front panel.Transfer Status11/03 12:00:00PMNX: 0.8591GB 2%Indicates file transfer destination and progress.If more than one destination is selected fora transfer, the screen only shows the firstdestination to which the LABvault-SD sends thefile. Changes to “Send Idle” when there are noactive file transfers.Processor Temperature11/03 12:00:00PMTemp: 42°CPStat Firmware Version11/03 12:00:00PMPStat Ver:66.03Displays the firmware version for thefront panel status LEDs.MPEG Player Status11/03 12:00:00PMMPEG Player StopBuild Number11/03 12:00:00PMBld Num:427 |
Related manuals for Leightronix LabVault-SD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine