34If you then press MENU and come back to the Setupmenu, the Post-processing option will no longer be therebecause you only need to enter the Activation Code once.Creating a New Job with the Post-Processing Op-tion- If there is a job that is currently open, close it by pressingMENU and selecting Close Job- Press LOG. MobileMapper Pro displays the Welcomescreen. This screen shows three options (instead of twowhen the post-processing option is not enabled).- Highlight Create New Job and press ENTER.- Enter the job name as explained earlier (see page 12).- After entering the name, highlight the OK key on thescreen and press ENTER. A new screen is then displayedlisting the feature libraries stored on the receiver’s SDcard.- Highlight the library you want to use and press ENTER. Anew screen is then displayed asking you to choose the jobmode:• Real-time: If you select this job mode, the receiver willrecord only feature positions and descriptions and GPSmetadata. Jobs recorded in real-time mode cannot bedifferentially corrected later on.• Post-processing: Select this job mode to allowMobileMapper Pro to record the job so that later on, itcan be post-processed in MobileMapper Office. In thisjob mode, MobileMapper Pro will record GPS measure-ments files in addition to the MMJ job file that isrecorded in real time.Welcome screen withpost-processing optionenabledJob Mode screen
