16ENPREPARATION[PC Connection]This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor.Use an VGA cable for this connection and it requires stereo mini plug audio cable as well.e.g.)The following signals can be displayed:Format Resolution Refresh rate Format Resolution Refresh rateVGA 640 x 480 60HzWXGA1,280 x 768 60HzSVGA 800 x 600 60Hz1,360 x 768 60HzXGA 1,024 x 768 60HzOther formats or non-standard signals will not be displayed correctly.Note:• Please purchase the VGA cable that has a ferrite core.• The following operations may reduce noise.- Attach a ferrite core to the AC power cord of your PC.- Unplug the AC power cord and use the built-in battery of your PC.Plug In the AC Power CordMake sure that the AC power cord must be plugged to an AC outlet after all the necessary connection is completed.Caution:• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.Note:• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.5No supplied cables are used in this connection:Please purchase the necessary cables at your local store.rear of this unitAC power cordAC outletstereo mini-plug audio cableVGA cablerear of this unitVGA cable should bewith ferrite core.personal computer
