24ENO PTIONAL SETTINGAntenna ConfirmationDTVThis function lets you check the digital signal strength of each channel.1 Press [MENU] to display the main menu.2 Use [Cursor K / L] to select “SETUP”, then press [OK].Channel ListAdd ChannelsAntennaPICTURESOUNDFEATURESLANGUAGEDVDSETUPAutoprogram3 Use [Cursor K /L] to select “Antenna”, then press [OK].Channel ListAdd ChannelsAntennaAutoprogramPICTURESOUNDFEATURESLANGUAGEDVDSETUP4 Use [the Number buttons] or [CH + / -] to select thechannel for which you want to check the digital signalstrength.11.1BackCh ChangeCHCurrent 50 50MaxPICTURESOUNDFEATURESLANGUAGEDVDSETUPIf the channel is set to analog channel or externalinput, you cannot confirm the antenna condition.VideoBackCh ChangePICTURESOUNDFEATURESLANGUAGEDVDSETUPIndicator is available for digitalbroadcasting only.CH5 Press [MENU] to exit.5•Language SelectionYou can choose English, Spanish, or French as your on-screen language.1 Press [MENU] to display the main menu.2 Use [Cursor K / L] to select “LANGUAGE”, then press[OK].Select the language for setup display.Elija el idioma de ajuste.Sélectionner langue écran config.EnglishEspañolFrançaisSETUPPICTURESOUNDFEATURESDVDLANGUAGE3 Use [Cursor K / L] to select “English”, “Español” or“Français”, then press [OK].Select the language for setup display.Elija el idioma de ajuste.Sélectionner langue écran config.EspañolFrançaisEnglishSETUPPICTURESOUNDFEATURESDVDLANGUAGE4 Press [MENU] to exit.Note:• If you need the English menus instead of the Spanish orFrench menus, press [MENU]. Use [Cursor K / L] to select“IDIOMA” or “LANGUE”, then press [OK].Use [Cursor K / L] to select “English”, then press [OK]. Press[MENU] to exit the main menu.5
