Magnavox 19MD359B User Manual

Also see for 19MD359B - HD Flat Panel LCD/DVD: Specification Quick start guide User manual

Contents

Magnavox 19MD359B User Manual Manual pdf 22 page image

22ENO PTIONAL SETTINGMain MenuThis section describes the overview of the main menu displayed when youpress [MENU]. For more details, see the reference page for each item.The main menu consists of the function setting items below.Press [MENU].PICTURESOUNDSETUPFEATURESLANGUAGEDVDTintShar pnessBrightnessContrastColor00306036Color TemperatureSmar t PictureNormalPersonalPICTUREYou can adjust the picture quality.(Refer to “Picture Adjustment” on page 25.)SOUNDYou can adjust the sound quality.(Refer to “Sound Adjustment” on page 26.)SETUPYou can automatically scan the viewable channels.(Refer to “Autoprogram” on page 22.)You can skip the undesired channels when selectingthe channels using [CH + / -].(Refer to “Channel List” on page 23.)You can add the channels that were not scanned bythe autoprogram.(Refer to “Add Channels” on page 23.)FEATURESYou can change the display format for closedcaption, which displays the dialogue of a TV programor other information across the TV screen.(Refer to “Closed Caption” on page 27.)You can set the viewing limitations.(Refer to ‘‘Child Lock” on page 30.)You can adjust the position, stability and clarity of thePC screen.(Refer to “PC Settings” on page 34.)You can select the energy saving mode.(Refer to “Energy Saving Mode” on page 35.)When you adjust the desired “PICTURE” and “SOUND”mode, you must switch the setting from “Retail” to“Home”. (Refer to “Location” on page 35.)You can confirm the version of the software currentlyused in this unit.(Refer to ”Current Software Info” on page 36.)LANGUAGEYou can change the language (English, Spanish,French) displayed on the main menu.(Refer to “Language Selection” on page 24.)DVDYou can customize some functions for the discplayback. Make sure the player is in stop mode.(Refer to “DVD SETTING“ section on page 46.)5•••••••••AutoprogramIf you switch wires (e.g., between antenna and CATV) or if you move theunit to a different area after the initial setting, or if you restore the DTVchannel you deleted, you will need to perform autoprogram.Before you begin: Make sure if the unit is connected to antenna or cables.1 Press [MENU] to display the main menu.2 Use [Cursor K / L] to select “SETUP” , then press [OK].Channel ListAdd ChannelsAntennaPICTURESOUNDFEATURESLANGUAGEDVDSETUPAutoprogram3 Use [Cursor K / L] to select “Autoprogram”, then press[OK].Channel ListAdd ChannelsAntennaAutoprogramPICTURESOUNDFEATURESLANGUAGEDVDSETUPUse [Cursor K / L] to select an appropriate option, thenpress [OK].AntennaCableBackAutoprogram will rescan all channels.Autoprogramming will take up to 20 minutesto complete.Select your signal source.PICTURESOUNDFEATURESLANGUAGEDVDSETUPAntennaCable OrANT.INWhen aerial antenna is connected, select “Antenna”.When connected to CATV, select “Cable”.“Autoprogram” will begin.When the scanning and memorizing are completed,the lowest memorized channel will be displayed.Note:• After setting “Autoprogram”, using [CH + / -] on the remotecontrol skips unavailable programs automatically.• If you connect the cable system directly, contact the CATVinstaller.• If you press [yy(power)] or [MENU] during autoprogram,the setting will be canceled.• Even if “Autoprogram“ is completed, the channel settingwill be lost if the AC power cord is unplugged beforeturning off the unit by pressing [yy(power)].• The PIN Code will be required once you set a PIN Code inthe “Child Lock” (Refer to page30).• If you want to change your PIN Code, follow the instructionof “Change PIN” (Refer to page 33.)5••••ExitMENU75%Analog channels 10 ch6 chDigital channelsNow the system is scanning for channels, please wait.Auto programming will take up to 20 minutes to complete.ExitMENU75%Analog channels 10 ch6 chDigital channelsNow the system is scanning for channels, please wait.Auto programming will take up to 20 minutes to complete.