Magnavox 32MV402X Owner's Manual

Also see for 22MV402X: Owner's manual Manual del propietario Manuel du propriétaire

Magnavox 32MV402X Owner's Manual Manual pdf 12 page image

English12Connecting the antenna or the cableBe sure your antenna or other device is connected properly beforeplugging in the AC power cord.If you connect to an antenna through RF cableAny DTV programs that are broadcasted in your area can be receivedfor free through an antenna connection.ININOUTantennaRF cablecableIf you connect a set-top box through RF cableIf the TV is connected to a cable box or satellite set-top box via acoaxial connection, set the TV to channel 3, 4 or the channel specifiedby the service provider.INININOUTset-top boxRF cableantennaRF cableIf you connect a set-top box through HDMIIf the TV is connected to a cable box or satellite set-top box via HDMI,make sure you select the correct Source by using SOURCE.INININ OUTset-top boxHDMI cableRF cableIf you connect a set-top box through Component Video InputIf the TV is connected to a cable box or satellite set-top box viaComponent Video Input, make sure you select the correct ComponentVideo Source by using SOURCE.INOUTOUTININININOUTOUTset-top boxRF cableAudio (L/R) cablesComponent (Y/Pb/Pr) Video cablesConnecting a set-top box, Blu-ray / DVD recorder viacomposite connectors and Analog AudioDo not place your recorder too close to the screen because somerecorders can be susceptible to signals.ININOUTOUTOUTININININOUTINOUTOUTRF cableRF cablecableset-top boxBlu-ray disc / DVD recorderAudio (L/R) + Video cablesAudio (L/R) +Video cablesNote• If you have any question about the DTV’s antenna, visit www.antennaweb.org for furtherinformation.• Depending on your antenna system, you may need different types of combiners(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on thesedevices is 2,000MHz or 2GHz.• For your safety and to avoid damage to this unit, please unplug the RF coaxial cablefrom the antenna Input jack before moving the unit.• If you did use an antenna to receive Analog TV, it should also work for DTV reception.Outdoor or attic antennas will be more effective than a set-top box or inside antenna.• To Turn On your reception source easily between antenna and cable, install an antennaselector.• If you are not receiving a signal from your cable service, contact the Cable provider.• Only the left loudspeaker reproduces sound for mono equipment. Use a mono tostereo adapter (not supplied) for sound reproduction via all internal loudspeakers.Plugging in the AC power cordMake sure that the AC power cord must be plugged to an AC outletafter all the necessary connections are made.Caution• Do not connect the AC power cord to a power supply outside the indicated voltage ofthis unit (AC 120V).• Connecting the AC power cord to a power supply outside of this range may result infire or electrical shocks.Note• Each time you plug in the AC power cord, no operations will be performed for a fewseconds. This is not a malfunction.