Magnavox 32MV402X Owner's Manual

Also see for 22MV402X: Owner's manual Manual del propietario Manuel du propriétaire

Magnavox 32MV402X Owner's Manual Manual pdf 29 page image

English29PreferencesYou can set the unit to reduce the power consumption or adjust thebacklight brightness in Location setting.fun-Link allows you to operate your connected fun-Link device.Setting your location to homeChoosing Home gives you full flexibility to change predefined settingsfor picture and sound.1 Use ▲▼ to select Preferences, then press OK.2 Use ▲▼ to select Location, then press OK.Language Location Retail storeChannels fun-Link (HDMI CEC) HomePreferencesNetworkReset AV settings3 Use ▲▼ to select Home, then press OK.Retail storeThe unit will be set up with predefined settings forretail displays. In this setting, the power consumptionmay possibly exceed the limit requirement of theENERGY STAR ® qualification.HomeThis setting is ENERGY STAR ® qualified.The unit is set to maximize the energy efficiencyfor home setting and it can be adjusted through achoice of picture and sound quality according to yourpreference.Note• You must set Home. Otherwise, personalized picture and sound settings will not bememorized after the unit goes into Standby mode.• If you select Home, E-sticker will not be displayed.E-stickerWhen you set Location to Retail store, E-sticker (Electronic Sticker) isdisplayed. E-sticker can be Turned Off using procedure below.1 Use ▲▼ to select Preferences, then press OK.2 Use ▲▼ to select E-sticker, then press OK.3 Use ▲▼ to select Off, then press OK.Use Magnavox fun-LinkYour TV supports Magnavox fun-Link, which enables one-touch playand one-touch Standby between fun-Link-compliant devices. Compliantdevices must be connected via an HDMI connector.One-touch playWhen you connect your TV to devices that support one-touch play,you can control your TV and the devices with one remote control. Forexample, when you press ►(play) on your DVD remote control, yourTV automatically switches to the correct channel to show the DVDcontent.One-touch StandbyWhen you connect your TV to devices that support Standby, you canuse your TV remote control to put your TV and all connected HDMIdevices in Standby mode. You can perform one-touch Standby using theremote control from any of the connected HDMI devices.System audio controlWhen you connect your TV to HDMI CEC compliant devices, yourTV can switch automatically to play audio from the connected device.To use one-touch audio, you must map the audio input from theconnected device to your TV. You can use the remote control from theconnected device to adjust the volume.HDMI-ARC (Audio Return Channel)HDMI-ARC allows you to use Magnavox fun-Link to output TV audiodirectly to a connected Audio device, without the need for an additionalDigital Audio cable. Be sure that the device is HDMI CEC and ARCcompliant, and that the TV is connected to the device using an HDMIcable attached to both HDMI-ARC connectors.Note• Magnavox does not guarantee 100% interoperability with all HDMI CEC devices.• The fun-Link-compliant device must be Switched On and selected as the source.