Magnavox MWC24T5 Owner's Manual

Also see for MWC24T5: Service manual Owner's manual

INDEX SEARCH0 3- TV/VCR SETUP -TIMER PROGRAMMINGSETTING CLOCKCHANNEL SET UPUSER’S SET UPV-CHIP SET UPLANGUAGE [ENGLISH]CAPTION [OFF]ZERO RETURNTIME SEARCHB INDEX SEARCH1 Press [SET-UP].Use [KK / LL] to point to"INDEX SEARCH", then press[ENTER].2 Use [KK / LL] until the numberof programs that you want toskip appears.3 Use [ss / BB]. The unit begins rewinding or fastforwarding to the beginning of desired program.4 When the search is completed, the unit will startplayback automatically.• The numbers of Index Search can be set up to20.• This function is not available during recording.TO CANCEL DURING INDEX SEARCHPress [STOP/EJECT C A] on the unit or [STOP CC].INDEX SEARCHTV/VCRTV/VCRThis function allows you to index thestarting point to make it easy to reachthe point in either fast forward or rewind mode.• Every time you start recording, an index is markedautomatically. The index mark also works as thestarting point of Timer recording and OTR.• The index mark will not be recorded if [PAUSE FF]is used during recording.• The time gap between making the index marks onthe tape should be greater than 1 minute for SPrecording, 2 minutes for LP recording and 3 min-utes for SLP recording.• In some cases, the index mark at the beginning ofvideo tape cannot be detected.Example: You are watching program number 4 andwant to fast forward to program number 7. Skipthree programs.Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.74 3 2 1 1 2 3End ofthe tapeBeginning ofthe tapeCURRENT PLAYBACK PROGRAMINDEX MARK17ENTIME SEARCH2 : 50TIME SEARCHTV/VCRTV/VCRThis function allows you to quicklyadvance the tape to your desired posi-tion simply by entering the exact amount of playbacktime you want to skip.In the example below: To watch a program before/after 2 hour 50 minutes from the present position,in either direction.1 Press [SET-UP].Use [KK / LL] to point to "TIMESEARCH", then press[ENTER].2 Use [KK / LL] until your desiredtime appears.To cancel the Time Search atthis point, press [SET-UP].NOTE:• Time Search can be set up to a maximum of 9 hours50 minutes (9:50) by 10 minutes at a time.3 Use [ss / BB] to rewind or fast forward to thespecified point.The time counts down during the search. Whenthe counter reaches "0:00:00", the tape will startplayback automatically.TO CANCEL DURING TIME SEARCHPress [STOP/EJECT C A] on the unit or [STOP CC].- TV/VCR SETUP -TIMER PROGRAMMINGSETTING CLOCKCHANNEL SET UPUSER’S SET UPV-CHIP SET UPLANGUAGE [ENGLISH]CAPTION [OFF]ZERO RETURNB TIME SEARCHINDEX SEARCHPICTURE SEARCHTV/VCRTV/VCRThis function is useful in finding orskipping over a particular scene on atape. In this mode, the sound will be muted.1 During playback, press [REW EE] or [FWD DD]to view at a high speed (in forward/reverse).2 Press [REW EE] or [FWD DD] again to view atsuper high speed (in LP/SLP modes only).NOTE:• Tapes recorded in the SP or LP mode will normallydisplay a noise bar on the TV screen and the picturemay revert to black and white.3 Press [PLAY BB] to return to normal playback.SPECIAL PLAYBACK / SEARCH FUNCTION TV/VCR SECTION