28ENYou can determine the playing order of tracks.1 In the stop mode, press [MODE].• The PROGRAM screen appears.2 Use [KK / LL] to select a track,then press [ENTER].NOTES:• Up to 99 tracks can be entered.• Press [CLEAR] to erase themost recently entered track.• If you enter more than 8 tracks, you can change pagesof the program list with [H / G].• To erase all tracks in the program at once, select "ALLCLEAR" at the bottom of the track list.3 Repeat step 2 until you select all the tracks youwant to play in the program.4 Press [PLAY BB] to play the programmed tracks.This function shuffles the playing order oftracks.1 In the stop mode, press[MODE] twice.• The RANDOM screen appears.2 Press [PLAY BB] to start random playback.NOTE:• REPEAT setting is available during random playback.(Refer to "REPEAT TRACK" on page 27.)3 Press [STOP CC] to stop random playback.PLAYCD-DA TOTAL 0:45:55RANDOM PROGRAM- - no indication - -RANDOMPROGRAMMED PLAYBACKRANDOM PLAYBACKYou can check the information about the current disc by pressing [DISPLAY].For DVD-Videos1 Press [DISPLAY] during playback to show cur-rent Chapter.• The elapsed and remainingplaying time of the currentchapter will be displayed.2 Press [DISPLAY] again to show current Title.• The elapsed and remainingplaying time of the current titlewill be displayed.3 Press [DISPLAY] again.• The bit rate and the currentrepeat setting will be displayed.• If you are playing a dual layered disc, the layernumber will also be displayed.(L0: Layer 0 is playing. L1: Layer 1 is playing).4 Press [DISPLAY] again to exit.9/49 0:00:00 -0:03:301/3 0:00:00 - 1:23:45T L1For Audio CDs1 Press [DISPLAY] during playback to show thecurrent Track.• The elapsed and remainingplaying time of the currenttrack will be displayed.2 Press [DISPLAY] again to show current TotalTrack.• The elapsed and remainingplaying time of the total trackwill be displayed.3 Press [DISPLAY] again to exit.4/12 0:03:21 - 0:02:15 T4/12 0:13:45 - 0:45:40 TPROGRAM BWhen in the PROGRAMmode or RANDOMmode.PROGRAMTOTAL 0:14:251/11/46 1:30CD-DAENTERCLEARPLAY2 4:301 3:40 1 3:403 5:004 3:105 5:106 1:303 5:0010 1:3012 2:456 1:307 2:30PROGRAMTOTAL 0:00:001/11/41 3:40CD-DAENTERCLEARPLAY2 4:301 3:403 5:004 3:105 5:106 1:307 2:30DVD SECTIONSPECIAL PLAYBACK FUNCTIONS & SETTINGS5 Press [STOP CC] to temporarily stop the playback.You can resume the playback by pressing[PLAY BB].Press [STOP CC] twice to cancel the pro-grammed playback.NOTE:• REPEAT setting is available during programmedplayback. (Refer to "REPEAT TRACK" on page 27.)ON-SCREEN INFORMATION