Magnetek Flex EM HazLoc Instruction Manual

Contents

Magnetek Flex EM HazLoc Instruction Manual Manual pdf 62 page image

Flex EM/EX HazLoc System Instruction ManualJune 2019Page 62 of 629 Declaration of ConformityEU Declaraon of Conformity CerficateFor the following equipment:Product : Flex Series Radio Remote Control – Hazloc VersionsMulple Listee Model No. : Flex 4ES/EX/EM, Flex 6EX, Flex 8ES/EX/EM, Flex 12ES/EX/EM, Flex 8/12 PRO _________Product Receiver Models : CAN-2, MHR, WIC-2402, Flex 4 RX, Flex 6 RX, Flex 8R X, Flex 12 RXManufacturer’s Name : Magnetek, Inc.Manufacturer’s Address : N49 W13650 Campbell DriveMenomonee Falls, WI 53051 USAThe undersigned hereby declares on behalf of Magnetek, that the above-referenced products, to which this declaraon relates, is in conformity with the provisions ofCE Mark Direcve (93/68/EEC), ATEX II Direcve (2014/34/EU), Machinery Safety Direcve (MD, 2006/42/EC), Radio Equipment Direcve (RED, 2014/53/EU), EMCDirecve (2014/30/EU), and the ROHS2 Direcve (2011/65/EU).The standards relevant for the evaluaon of the product referenced above conformity to the direcve requirements are as follows:EN 301 489-1 v1.9.2:2011EN 301 489-3 v1.4.1:2002-04EN 300 220-1 v2.3.1:2010EN 300 220-2 v2.3.2:2010EN 60204-32:1998EN 60950-1:2006+A11:2009+A1:2010+A12:2011EN 60529:1992EN ISO 13849-1:2008EN 13557:2003+A2:2008EN 60079-0:2012EN 60079-11:2012ATEX specific informaon:Product is in conformity with the EC type examinaon cerficate: DEMKO 16 ATEX 1601XFor Equipment Group and Category: II 3 GType of Protecon: icExplosion Group: IICTemperature Class: T3 & T4Issued by the nofied body:UL InternaonalLyskær 8DK-2730 HerlevKenn-Nr. / ident. No. 0539The product has been manufactured, finally inspected and tested under a quality system, which has been approved by the nofied body:UL, LLC2500 West Dundee RoadNorthbrook, IL 60062The European contact for Magnetek is: Brian PrestonMagnetekUnit 3, Bedford Business CentreMile RoadBedfordMK42 9TWUnited KingdomPer Annex II.B of the Machinery Direcve (2006/42/EC):The machinery, product, assembly or sub-assembly covered by this Declaraon of Conformity must not be put into service unl the machinery into which it is to beincorporated has been declared in conformity with the provisions of the applicable Direcve(s). This statement is only necessary where the product is to be incorporatedinto a machine or system (e.g. a safety component).Signature of Authorized Person:Travis TedescoEngineering Development ManagerColumbus McKinnon CorporaonBridgeville, PA USADate of Issuance: 31 January 2019 Peter SpanDirector of DevelopmentColumbus McKinnon CorporaonMenomonee Falls, WI USA

/ 62

Related manuals for Magnetek Flex EM HazLoc