Magnetek Flex EM HazLoc Instruction Manual

Contents

Magnetek Flex EM HazLoc Instruction Manual Manual pdf 9 page image

Flex EM/EX HazLoc System Instruction ManualJune 2019Page 9 of 622 Critical Installation Considerations2.1 GeneralRadio-controlled equipment operates in several directions. The equipment is often operated in areaswhere people are working in close proximity to the equipment. The operator must exercise extremecaution at all times. Workers must constantly be alert to avoid accidents. The following recommendationshave been included to indicate how careful and thoughtful actions may prevent injuries, prevent damage toequipment, or even save a life.2.2 Persons Authorized to Operate Radio-ControlledCranesOnly properly trained persons designated by management should be permitted to operate radio-controlledequipment.Radio-controlled equipment should not be operated by any person who cannot read or understand signs,notices and operating instructions that pertain to the equipment.Radio-controlled equipment should not be operated by any person with insufficient eyesight or hearing orby any person who may be suffering from a disorder or illness that may cause them to lose control of theequipment, is taking any medication that may cause loss of equipment control, or is under the influence ofalcohol or drugs.WARNINGPrior to installation and operation of this equipment, read and develop an understanding of the contentsof this manual and the operation manual of the equipment or device to which this equipment will beinterfaced. Failure to follow this warning could result in serious injury or death and damage toequipment.Follow your local lockout/tagout procedure before maintaining any remote-controlled equipment.Always remove all electrical power from the equipment before attempting any installation procedures.De-energize and tagout all sources of electrical power before touch-testing any equipment. Failure tofollow this warning could result in serious injury or death and damage to equipment.After installation, be sure to verify that the transmitter is not interfering with other equipment in the area.Also verify that other equipment is not interfering with the transmitter and its associated equipment.Failure to follow these warnings could result in serious injury or death and damage to equipment.