Magnum Energy MM Series Installation And Operation Manual

Contents

Magnum Energy MM Series Installation And Operation Manual Manual pdf 3 page image

©2006 Magnum Energy Inc.IMPORTANT PRODUCT SAFETY INSTRUCTIONSThis manual contains important safety instructions that must befollowed during the installation and operation of this product. Read allinstructions and safety information contained in this manual beforeinstalling or using this product.• All electrical work must be performed in accordance with local, stateand federal electrical codes.• This product is designed for indoor / compartment installation. Itmust not be exposed to rain, snow, moisture or liquids of any type.• Use insulated tools to reduce the chance of electrical shock oraccidental short circuits.• Remove all jewelry such as rings, watches, bracelets, etc., wheninstalling or performing maintenance on the inverter.• Always disconnect the batteries or energy source prior to installingor performing maintenance on the inverter. Live power may be presentat more than one point since an inverter utilizes both batteries and AC.Turning off the inverter may not reduce this risk. As long as AC poweris connected, it will pass thru the inverter regardless of the ON/OFFpower switch.• Always verify proper wiring prior to starting the inverter.• Do not operate the inverter if it has been damaged.• Do not dismantle the inverter; there are no user serviceable partscontained in this product. Attempting to service the unit yourself couldcause electrical shock. Internal capacitors remain charged after allpower is disconnected.• No AC or DC disconnects are provided as an integral part of thisinverter. Both AC and DC disconnects must be provided as part of thesystem installation.• No overcurrent protection for the battery supply is provided as anintegral part of this inverter. Overcurrent protection of the batterycables must be provided as part of the system installation..• No overcurrent protection for the AC output wiring is provided as anintegral part of this inverter. Overcurrent protection of the AC outputwiring must be provided as part of the system installation.SAVE THESE INSTRUCTIONSiihttp://www.wholesalesolar.com/inverters.htmlhttp://www.wholesalesolar.com/inverters.html