Magnum Energy MM Series Installation And Operation Manual

Contents

Magnum Energy MM Series Installation And Operation Manual Manual pdf 9 page image

©2006 Magnum Energy Inc.2134658 7Figure 2, Top Side FeaturesStandard Features and BenefitsThe MM Series inverter converts 12 Volts Direct Current (VDC) powerfrom your battery to 120 Volts Alternating Current (VAC) power. Onmodels with the multistage battery charger feature, the incoming ACpower is optimized using Power Factor Correction (PFC) technology tokeep the inverter’s battery bank fully charged. This inverter is de-signed to allow easy installation and use and with its die-cast aluminumbaseplate, which ensures maximum durability and cooler moreefficient operation.The inverter is equipped with the following features:• 600 or 1200 watts continuous (depending on model) at 25° Celsius.• Equipped with numerous protection features to provide a safe andpeace-of-mind operation.• Unique AC transfer switch circuitry; allowing incoming AC power tocontinue to pass-thru to power loads even if the inverter is off.• Dead battery charging (battery charger models) allows chargingbatteries that are extremely low.• Automatic 4-stage battery charger with Power Factor Correction andTemperature compensation - for optimum battery charging (modelswith battery charger and using temperature sensor)• Modern and aesthetically pleasing design with large AC wiringcompartment (provides easy access to AC wiring for simple and quickconnections) and 360° DC connection terminals with color codedinsulating covers.• True RMS output voltage regulation, to ensure the inverter willdeliver the correct amount of power within the DC input voltage rangeand continuous output power level.• Quick connection accessory and remote ports - easily acceptsseveral optional remote controls and the Battery Temperature Sensor.1.0 Introduction3http://www.wholesalesolar.com/inverters.htmlhttp://www.wholesalesolar.com/inverters.html