Magnum Energy MS-PAE Series Owner's Manual

Contents

Magnum Energy MS-PAE Series Owner's Manual Manual pdf 48 page image

© 2009 Magnum Energy IncPage 42B.1 Optional Equipment/AccessoriesThe following Magnum Energy components are available for use with the MS-PAE Series inverter/Charger. Some of these items are required depending upon the intended use of the inverter.MMP Series EnclosuresThe MMP175-30D. MMP175-60S, MMP250-30D and MMP250-60S enclosures are for single inverterapplications. The MMP Series enclosures have been specifically designed to combine all of the majorcomponents required for a renewable energy system - inverter/battery disconnect, AC overcurrentprotection, grounding connections and a full system inverter bypass switch as a convenient way toisolate the inverter for battery maintenance - into a single, easy to install pre-wired enclosure.MP Series EnclosuresThe MPSL, MPSH, MPDH enclosures have been specifically designed to combine the MS-PAE inverter’swhen configured for parallel operation. The MP enclosures feature convenient front mounted ACand DC connections and easy panel operation using the optional ME-RTR router. Choose the MPmodel based on your power capacity needs. Each model is expandable, start with the base modeland just one inverter and in the future add another inverter - up to four inverter’s total dependingon your model - with ease, using the MPX expansion boxes.Router Control Display PanelThe ME-RTR Router Control Display Panel provides operating information and setup/troubleshootingcapabilities for multiple Magnum inverters. Allows up to four MS-PAE inverter’s to be connectedin a parallel configuration for increased inverter power.Advanced Remote Control DisplayThe ME-ARC allows the advanced features of the MS-PAE inverter to be configured. This LCD re-mote display also provides advanced monitoring/troubleshooting and includes a FAVS button toaccess your favorite features quickly.Standard Remote Control DisplayThe ME-RC Remote Control is simple to use; an easy-to-read LCD screen and “at a glance” LEDsdisplay complete inverter/charger status. Soft keys provide simple access to menus and a rotaryencoder knob allows you to scroll through and select a wide range of settings such as InverterON/OFF, Charger ON/OFF, Shore Power Breaker Setting, AGS Control, Meter Button, Setup andTech menus.Auto Generator ControllerThe ME-AGS-N (Rev 5.0) is designed to automatically start your generator based on low batterycondition or high temperature. The AGS controller includes an input voltage jumper (for 12, 24and 48 volt battery banks) and a 4-position DIP (Dual In-line Package) switch which providesthe ability to change the relay timing configurations to allow compatibility with a wider range ofgenerators. Adjustable settings include starting the generator based on battery voltage, Time ofday, battery State of Charge or High Temperature. Includes “Quiet Time” with an easy to set clock.AGS settings do not interfere with the manual start / stop operation of the generator.Battery MonitorThe Battery Monitor Kit (ME-BMK) is a single battery bank amp-hour meter that monitors the condi-tion of the battery and provides information to let you know how much energy you have availableand let you plan your electrical usage to ensure the battery is not being over-discharged.Fuse Block/FusesThe Magnum Fuse/Fuse-blocks (TFB-XXX) are used to protect the battery bank, inverter, andcables from damage caused by DC short circuits and overloads. They include a slow-blow, highcurrent Class-T fuse with mounting block and protective cover. The fuse sizes are available in 125,200, 300 and 400 amps.Appendix B - Optional Equipment/Accessories