Makita DBC260U Original Instruction Manual

Also see for DBC260L: Original instruction manual

Contents

To meet the applicable safety standards, you must only use the tool/protectorcombinations indicated in the table.Always use genuine MAKITA cutter blades/nylon cutting head.– The cutter blade must be well polished, and free of cracks or breakages. If thecutter blade hits against a stone during operation, stop the engine and checkthe blade immediately.– Polish or replace the cutter blade every three hours of operation.– If the nylon cutting head hits against a stone during operation, stop the engineand check the nylon cutting head immediately.CAUTION: The appropriate protectors must always be installed for your ownsafety and in order to comply with accident-prevention regulations.Operation of the equipment without the guard installed is prohibited.– Fix the protector (1) to the clamp (3) with two M6 x 30 bolts (2).– When using the string head, fit the protector (6) into the protector (1), andtighten them with two nuts (5) and two screws (4).Mounting the protectorStar Blade Eddy Blade Protector for metal blades Nylon cutting head Protector for cord cutterPART NO. 6258507600 PART NO. 6258507700 PART NO. 6258065000 PART NO. 6218016000 PART NO. 6258064000(2)(3)(1)(4)(1)(6)(5)11