2 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DLS110 DLS111 DLS112Blade diameter 255 mm (10″)Hole diameter 15.88 mm (5/8″)Max. kerf thickness of the saw blade 3.2 mm (1/8″)Max. miter angle Right 60°, Left 60°Max. bevel angle Right 48°, Left 48°No load speed (RPM) 4,400 /minLaser type - Wavelength 655 nm, Maximum output1mW (Laser Class II)Rated voltage D.C. 36 VBattery cartridge BL1815N, BL1820B, BL1830, BL1830B, BL1840B, BL1850B, BL1860BCharger DC18RC, DC18RD, DC18RE, DC18SD, DC18SE, DC18SFDimensions (L x W x H) 805 mm x 644 mm x 660 mm(31-3/4" x 25-3/8" x 26")Net weight 26.6 - 27.3 kg(58.6 - 60.2 lbs)Cutting capacities (H x W)Miter angle Bevel angle45° (left) 0° 45° (right)0° 47 mm x 305 mm(1-7/8″ x 12″)61 mm x 279 mm(2-3/8″ x 11″)71 mm x 305 mm(2-13/16″ x 12″)91 mm x 279 mm(3-5/8″ x 11″)29 mm x 305 mm(1-1/8″ x 12″)43 mm x 279 mm(1-11/16″ x 11″)45° (right and left) 47 mm x 215 mm(1-7/8″ x 8-1/2″)61 mm x 197 mm(2-3/8″ x 7-3/4″)71 mm x 215 mm(2-13/16″ x 8-1/2″)91 mm x 197 mm(3-5/8″ x 7-3/4″)29 mm x 215 mm(1-1/8″ x 8-1/2″)43 mm x 197 mm(1-11/16″ x 7-3/4″)60° (right and left) - 71 mm x 152 mm(2-13/16″ x 6″)91 mm x 139 mm(3-5/8″ x 5-1/2″)-Cutting capacities for special cuttingsType of cutting Cutting capacityCrown molding 45° type(with crown molding stopper used)168 mm(6-5/8″)Base board(with horizontal vise used)133 mm(5-1/4″)• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.