Makita DLS110 Instruction Manual
Also see for DLS110: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                                                                                                | |
39 ENGLISH12► 1. Left 45° adjusting bolt 2. Right 45° adjusting boltAdjusting the laser line positionFor DLS111, DLS112 onlyWARNING: The batteries must be installedwhile adjusting the laser line. Take extra care notto switch on the tool during adjustment. Accidentalstart up of the tool may result in serious personal injury.CAUTION: Never look directly into the laserbeam. Direct eye exposure to the beam could causeserious damage to your eyes.NOTICE: Check the position of laser line regu-larly for accuracy.NOTICE: Beware that impacts to the tool. It maycause the laser line to be misaligned or may causedamage to the laser, shortening its life.NOTICE: Have the tool repaired by a Makitaauthorized service center for any failure on thelaser unit.The movable range of laser line is decided by the rangeadjustment screws on both sides. Perform followingprocedures to alter the laser line position.1. Remove the batteries.2. Draw a cutting line on the workpiece and place iton the turn base. At this time, do not secure the work-piece with a vise or similar securing device.3. Lower the handle and align the cutting line withthe saw blade.4. Return the handle to the original position andsecure the workpiece with the vertical vise so that theworkpiece does not move from the position you havedetermined.5. Install the batteries and turn on the laser switch.6. Loosen the adjusting screw. To move the laser lineaway from the blade, turn the range adjustment screwscounterclockwise. To move the laser line close to theblade, turn the range adjustment screw clockwise.Adjusting the laser line on the left side of the blade4 5123► 1. Adjusting screw 2. Range adjustment screw3. Hex wrench 4. Laser line 5. Saw bladeAdjusting the laser line on the right side of theblade45123► 1. Adjusting screw 2. Range adjustment screw3. Hex wrench 4. Laser line 5. Saw blade |
Related manuals for Makita DLS110
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
manualsdatabase
Your AI-powered manual search engine