Makita DPC6410 Instruction And Safety Manual

Also see for DPC6410 (UK): Spare parts list Parts Breakdown Instruction and safety manual

2813 1415Press the cutting attachment (13) onto the drive arm in theside position.Guide the V-belt (14) over the V-belt pulley (15).NOTE: The illustration shows the V-belt for models DPC6410- 7321).Put the guard plate (16) on.Screw on nuts (17) and tighten by hand.To tighten the V-belt see ”Tightening the V-belt / Checking V-belt tension”.Screw in and tighten the screw (detail X, only for DPC8112).Tighten the nuts (17) firmly with the combination wrench.Replace the grip (18) as shown.IMPORTANT:When you reposition the cutting attachment, the directionof rotation of the cutting wheel changes.If a rotation direction is marked on the cutting disc, makesure the disc turns in the right direction.16 17181920Replacing/cleaning the spark arrester screenThe spark arrester screen should be checked and cleanedregularly.Models without catalytic converterLoosen the 2 screws (19) and remove the spark arresterscreen (20).Models with catalytic converterUnscrew and remove screws (21). Remove the front housingsection of the muffler (22).Unscrew and remove screw (23). Remove the deflector plateand spark arrester screen (24).CAUTION:Do not use sharp or pointed objects for screen cleaning.Damaged or misformed screen wires may result.Reassembly the spark arrester screen and tighten the screws.Information on the catalytic converter: The catalytic converterreduces the pollutant content of the exhaust.21 22 23 24Models without catalytic converterModels with catalytic converter