Makita DPC6410 Instruction And Safety Manual

Also see for DPC6410 (UK): Spare parts list Parts Breakdown Instruction and safety manual

52314SAFETY PRECAUTIONSIntended usePower CutUse the Power Cut cutoff saw outdoors only, for trimming and cuttingsuitable materials, using cutting discs rated for this machine.Improper use:Never use the cutoff saw cutting discs for grinding or sanding (usingthe side of the cutting disc to remove material). The disc can break!Never use the Power Cut with saw blades, cutter blades, brushes,carbide tipped, wood cutting blades etc.Unauthorised users:Persons unfamiliar with the Instruction Manual, children, youngpeople, and persons under the influence of alcohol, drugs or medi-cations must not use the Power Cut.General precautions- The operator MUST read this instruction manual to ensuresafe operation (even if you already have experience in us-ing cutoff saws). It is important to be familiar with the opera-tion of this particular cutoff saw. Users insufficiently informedwill endanger themselves as well as others due to improperhandling.- Let only persons who have experience in using cutoff saws workwith this unit. When letting another person use the Power Cut,this instruction manual must be provided along with it.- First-time operators should ask a specialist to instruct them inworking with gasoline-powered cutoff saws.- Children and persons under 18 years of age must not be allowedto use this Power Cut. Persons over the age of 16 years may,however, use the Power Cut for the purpose of being trained aslong as they are under the supervision of a qualified trainer.- Working with the Power Cut requires high concentration.- Operate the Power Cut only if you are in good physical condition.If you are tired, your attention will be reduced. Be especiallycareful at the end of a working day. Perform all work calmly andcarefully. The user has to accept liability for others.- Never work while under the influence of alcohol, drugs, medica-tion or other substances which may impair vision, dexterity orjudgement.- A fire extinguisher must be available in the immediate vicinitywhen working in easily inflammable vegetation or when it hasnot rained for a long time (danger of fire).- Asbestos and other materials that can release toxins may be cutonly with the necessary safety precautions and after notificationof the proper authorities and under their supervision or that ofa person appointed by them.- The use of dust-reduction devices is urgently recommended(see Accessories, pressure water tank, water tank).Protective equipment- In order to avoid head, eye, hand or foot injuries as well asto protect your hearing the following protective equipmentmust be used during operation of the Power Cut:- The kind of clothing should be appropriate, i. e. it should be tight-fitting but not be a hindrance. Clothing in which grains of materialcan accumulate (trousers with cuffs, jackets and trousers withwide-open pockets, etc.) must not be worn, particularly whencutting metal.- Do not wear any jewellery or clothing that can get caught ordistract from the operation of the Power Cut.- It is necessary to wear a protective helmet whenever workingwith the Power Cut. The protective helmet (A) is to be checkedin regular intervals for damage and is to be replaced after 5years at the latest. Use only approved protective helmets.- The helmet visor (B) protects the face from dust and materialgrains. In order to prevent injuries to eyes and face, alwayswear protective goggles (C) or visor when using the PowerCut.- To prevent hearing damage, always wear suitable personalhearing protection. (ear muffs (D), ear plugs, etc.). Octavebrand analysis upon request.- When dry-cutting dust-producing materials such as stoneor concrete, always wear approved respiratory protection(E).- Work gloves (F) of tough leather are part of the requiredwork kit of the Power Cut and must always be worn whenworking with the Power Cut.