Makita DUR190U Instruction Manual

Also see for DUR190L: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

16 ENGLISHTo remove the pipe, turn the lever to the direction of thearrow shown in the figure and pull the pipe out whilepressing down the lock lever.123► 1. Lever 2. Lock lever 3. PipeInstalling the protectorWARNING: Never use the tool without theguard illustrated in place. Failure to do so cancause serious personal injury.CAUTION: Take care not to injure yourself onthe cutter for cutting the nylon cord.Attach the protector to the clamp using bolts.123► 1. Clamp 2. Protector 3. CutterInstalling the cutting toolNOTE: The type of the cutting tool(s) supplied asthe standard accessory varies depending on thecountries. The cutting tool is not included in somecountries.NOTE: Turn the tool upside down so that you canreplace the cutting tool easily.Cutter bladeCAUTION: When handling a cutter blade,always wear gloves and put the blade cover onthe blade.CAUTION: The cutter blade must be well pol-ished, and free of cracks or breakage. If the cutterblade hits a stone during operation, stop the tool andcheck the cutter blade immediately.CAUTION: Always use the cutter bladewith the diameter described in the section forspecifications.12345 67► 1. Nut 2. Cup 3. Clamp washer 4. Cutter blade5. Spindle 6. Guard 7. Spindle lock button1. Mount the cutter blade onto the guard so that thearrows on the cutter blade and protector are pointing inthe same direction.11► 1. Arrow