Makita DUR190U Instruction Manual

Also see for DUR190L: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

5 ENGLISHSymbolsThe followings show the symbols used for the equipment.Be sure that you understand their meaning before use.Take particular care and attention.Read instruction manual.15m(50 FT) Keep distance at least 15 m.Danger; be aware of thrown objects.Caution; kickbackWear a helmet, goggles and ear protection.Wear protective gloves.Wear sturdy boots with nonslip soles.Steeltoed safety boots are recommended.Do not expose to moisture.Ni-MHLi-ionOnly for EU countriesDo not dispose of electric equipment orbattery pack together with household wastematerial! In observance of the EuropeanDirectives, on Waste Electric and ElectronicEquipment and Batteries and Accumulatorsand Waste Batteries and Accumulatorsand their implementation in accordancewith national laws, electric equipment andbatteries and battery pack(s) that havereached the end of their life must be col-lected separately and returned to an envi-ronmentally compatible recycling facility.EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications providedwith this power tool. Failure to follow all instructionslisted below may result in electric shock, fire and/orserious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosive atmo-spheres, such as in the presence of flammableliquids, gases or dust. Power tools create sparkswhich may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical safety1. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.2. Avoid body contact with earthed or groundedsurfaces, such as pipes, radiators, ranges andrefrigerators. There is an increased risk of elec-tric shock if your body is earthed or grounded.3. Do not expose power tools to rain or wet con-ditions. Water entering a power tool will increasethe risk of electric shock.4. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edgesor moving parts. Damaged or entangled cordsincrease the risk of electric shock.5. When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use ofa cord suitable for outdoor use reduces the risk ofelectric shock.6. If operating a power tool in a damp locationis unavoidable, use a residual current device(RCD) protected supply. Use of an RCD reducesthe risk of electric shock.7. Power tools can produce electromagneticfields (EMF) that are not harmful to the user.However, users of pacemakers and other similarmedical devices should contact the maker of theirdevice and/or doctor for advice before operatingthis power tool.Personal safety1. Stay alert, watch what you are doing and usecommon sense when operating a power tool.Do not use a power tool while you are tired orunder the influence of drugs, alcohol or med-ication. A moment of inattention while operatingpower tools may result in serious personal injury.2. Use personal protective equipment. Alwayswear eye protection. Protective equipment suchas a dust mask, non-skid safety shoes, hard hat orhearing protection used for appropriate conditionswill reduce personal injuries.3. Prevent unintentional starting. Ensure theswitch is in the off-position before connectingto power source and/or battery pack, pickingup or carrying the tool. Carrying power tools withyour finger on the switch or energising power toolsthat have the switch on invites accidents.4. Remove any adjusting key or wrench beforeturning the power tool on. A wrench or a key leftattached to a rotating part of the power tool mayresult in personal injury.