Makita DUR190U Instruction Manual

Also see for DUR190L: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

3 ENGLISHModel DUR190LCutting tool Sound pressure level (LpA)dB(A)Sound power level (LWA)dB(A)ApplicablestandardLpA dB(A) Uncer-tainty (K)dB(A)LWA dB(A) Uncer-tainty (K)dB(A)4-tooth blade 77.0 3.9 91.6 2.4 ISO22868(ISO11806-1)Nylon cutting head 74.0 1.9 87.1 0.9 ISO22868(ISO11806-1)/EN50636-2-91Plastic blade 75.6 1.3 85.9 2.1 ISO22868(ISO11806-1)/EN50636-2-91Model DUR191UCutting tool Sound pressure level (LpA)dB(A)Sound power level (LWA)dB(A)ApplicablestandardLpA dB(A) Uncer-tainty (K)dB(A)LWA dB(A) Uncer-tainty (K)dB(A)4-tooth blade 77.0 3.9 91.6 2.4 ISO22868(ISO11806-1)Nylon cutting head 74.0 1.9 87.1 0.9 ISO22868(ISO11806-1)/EN50636-2-91Plastic blade 75.6 1.3 85.9 2.1 ISO22868(ISO11806-1)/EN50636-2-91Model DUR191LCutting tool Sound pressure level (LpA)dB(A)Sound power level (LWA)dB(A)ApplicablestandardLpA dB(A) Uncer-tainty (K)dB(A)LWA dB(A) Uncer-tainty (K)dB(A)4-tooth blade 77.0 3.9 91.6 2.4 ISO22868(ISO11806-1)Nylon cutting head 74.0 1.9 87.1 0.9 ISO22868(ISO11806-1)/EN50636-2-91Plastic blade 75.6 1.3 85.9 2.1 ISO22868(ISO11806-1)/EN50636-2-91• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB(A). Wear ear protection.NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method andmay be used for comparing one tool with another.NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actual use of the power tool can differ from the declared val-ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.WARNING: Be sure to identify safety measures to protect the operator that are based on an estimationof exposure in the actual conditions of use (taking account of all parts of the operating cycle such as thetimes when the tool is switched off and when it is running idle in addition to the trigger time).