Makita LS1013 Instruction Manual
Also see for LS1013: Instruction manualInstruction manualParts BreakdownInstruction manualInstruction manual
                                                                            | |
15In the case of left bevel cutExample:In the case of cutting 52/38° type crownmolding for position (1) in Fig. A:• Tilt and secure bevel angle setting to33.9° LEFT.• Adjust and secure miter angle setting to31.6° RIGHT.• Lay crown molding with its broad back(hidden) surface down on the turn basewith its CEILING CONTACT EDGEagainst the guide fence on the saw.• The finished piece to be used willalways be on the LEFT side of the bladeafter the cut has been made.In the case of right bevel cutExample:In the case of cutting 52/38° type crownmolding for position (1) in Fig. A:• Tilt and secure bevel angle setting to33.9° RIGHT.• Adjust and secure miter angle setting to31.6° RIGHT.• Lay crown molding with its broad back(hidden) surface down on the turn basewith its WALL CONTACT EDGE againstthe guide fence on the saw.• The finished piece to be used willalways be on the RIGHT side of theblade after the cut has been made.(1)(2)(3)(4)Moldingposition inFig. ABevel angle Miter angleFor outsidecornerFor insidecorner52/38˚ type 45˚ typeRight 31.6˚45˚ typeLeft 33.9˚ Left 30˚52/38˚ typeLeft 31.6˚Right 31.6˚Left 35.3˚Right 35.3˚Right 35.3˚Table (A)006361Moldingposition inFig. AMolding edge againstguide fence Finished piece(1) Ceiling contact edge shouldbe against guide fence.(2)(3)(4) Ceiling contact edge shouldbe against guide fence.ForoutsidecornerFinished piecewill be on theLeft side ofblade.Finished piecewill be on theRight side ofblade.For insidecornerWall contact edge should beagainst guide fence.Table (B)006362(1)(2)(3)(4)Moldingposition inFig. ABevel angle Miter angleFor outsidecornerFor insidecorner52/38˚ type 45˚ typeRight 31.6˚45˚ typeRight 33.9˚ Right 30˚52/38˚ typeLeft 31.6˚Right 31.6˚Left 35.3˚Right 35.3˚Right 35.3˚Table (A)006363Moldingposition inFig. AMolding edge againstguide fence Finished piece(1)Ceiling contact edge shouldbe against guide fence.(2)(3)(4)ForoutsidecornerFinished piecewill be on theLeft side ofblade.Finished piecewill be on theRight side ofblade.For insidecornerWall contact edge should beagainst guide fence.Table (B)Wall contact edge should beagainst guide fence.006364 |
Related manuals for Makita LS1013
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
manualsdatabase
Your AI-powered manual search engine