Makita LS1013 Instruction Manual
Also see for LS1013: Instruction manualInstruction manualParts BreakdownInstruction manualInstruction manual
                                                                            | |
8Tilt the saw blade until the pointer points to the desiredangle on the bevel scale. Then tighten the leverclockwise firmly to secure the arm.123 4001543CAUTION:• When tilting the saw blade, be sure to raise thehandle fully.• After changing the bevel angle, always secure thearm by tightening the lever clockwise.• When changing bevel angles, be sure to positionthe kerf boards appropriately as explained in the"Positioning kerf boards" section.Switch actionCAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.• When not using the tool, remove the lock-off buttonand store it in a secure place. This preventsunauthorized operation.• Do not pull the switch trigger hard without pressingin the lock-off button. This can cause switchbreakage.213001551To prevent the switch trigger from being accidentallypulled, a lock-off button is provided. To start the tool,press in the lock-off button and pull the switch trigger.Release the switch trigger to stop.WARNING:• NEVER use tool without a fully operative switchtrigger. Any tool with an inoperative switch isHIGHLY DANGEROUS and must be repairedbefore further usage.• For your safety, this tool is equipped with a lock-offbutton which prevents the tool from unintendedstarting. NEVER use the tool if it runs when yousimply pull the switch trigger without pressing thelock-off button. Return tool to a Makita servicecenter for proper repairs BEFORE further usage.• NEVER tape down or defeat purpose and functionof lock-off button.Electric brakeThis tool is equipped with an electric blade brake. If thetool consistently fails to quickly stop blade after switchtrigger release, have tool serviced at a Makita servicecenter.The blade brake system is not a substitute for bladeguard. NEVER USE TOOL WITHOUT A FUNCTIONINGBLADE GUARD. SERIOUS PERSONAL INJURY CANRESULT.Lighting up the lampsFor Model LS1013F/LS1013FL only12002026CAUTION:• This is not a rainproof light. Do not wash the light inwater or use it in a rain or a wet area. Such aconduct can cause an electric shock and fume.• Do not touch the lens of the light, as it is very hotwhile it is lighted or shortly after it is turned off. Thismay cause a burn to a human body.• Do not apply impact to the light, which may causedamage or shorted service time to it.• Do not keep casting the beam of the light to youreyes. This can cause your eyes to be hurt.• Do not cover the light with clothes, carton,cardboard or similar objects while it is lighted,which can cause a fire or an ignition.Push the upper position of the switch for turning on thelight and the lower position for off.1. Light2. Light switch1. Lock-off button2. Handle3. Switch trigger1. Arm2. Lever3. Pointer4. Bevel scale |
Related manuals for Makita LS1013
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
Makita LS1013 Instruction Manual
manualsdatabase
Your AI-powered manual search engine