Makita LS1019 Instruction Manual

Also see for LS1019: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

14 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: LS1019 LS1019LBlade diameter European countries 260 mmCountries other than Europe 255 mm - 260 mmHole diameter European countries 30 mmCountries other than Europe 25.4 mmMax. kerf thickness of the saw blade 3.2 mmMax. miter angle Right 60°, Left 60°Max. bevel angle Right 48°, Left 48°No load speed (RPM) 3,200 min -1Laser type - Red Laser 650 nm, Maximumoutput 1.6mW( Laser Class 2M )Dimensions (L x W x H) 805 mm x 644 mm x 660 mmNet weight 26.1 kg 26.3 kgCutting capacities (H x W)Miter angle Bevel angle45° (left) 0° 45° (right)0° 42 mm x 310 mm58 mm x 279mm68 mm x 310 mm91 mm x 279 mm29 mm x 310 mm43 mm x 279 mm45° (right and left) 42 mm x 218 mm58 mm x 197 mm68 mm x 218 mm91 mm x 197 mm29 mm x 218 mm43 mm x 197 mm60° (right and left) - 68 mm x 155 mm91 mm x 139 mm-Cutting capacities for special cuttingsType of cutting Cutting capacityCrown molding 45° type(with crown molding stopper used)168 mmBase board(with horizontal vise used)133 mm• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2014SymbolsThe following show the symbols used for the equip-ment. Be sure that you understand their meaning beforeuse.Read instruction manual.DOUBLE INSULATIONTo avoid injury from flying debris, keepholding the saw head down, after makingcuts, until the blade has come to a com-plete stop.When performing slide cut, first pull car-riage fully and press down handle, thenpush carriage toward the guide fence.Do not place hand or fingers close to theblade.Never look into the laser beam. Direct laserbeam may injure your eyes.Only for EU countriesDo not dispose of electric equipmenttogether with household waste material! Inobservance of the European Directive, onWaste Electric and Electronic Equipmentand its implementation in accordance withnational law, electric equipment that havereached the end of their life must be col-lected separately and returned to an envi-ronmentally compatible recycling facility.