Makita LS1019 Instruction Manual

Also see for LS1019: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

18 ENGLISHSAVE THESE INSTRUCTIONS.WARNING: DO NOT let comfort or familiaritywith product (gained from repeated use) replacestrict adherence to safety rules for the subjectproduct. MISUSE or failure to follow the safetyrules stated in this instruction manual may causeserious personal injury.PARTS DESCRIPTION► Fig.21 Slide pole 2 Stopper pin (for carriagesliding)3 Vertical vise 4 Releasing button (forright side bevel angle)5 Holder 6 Turn base 7 Pointer (for miter angle) 8 Miter angle scale9 Kerf board 10 Blade case 11 Adjusting screw (forlaser line)12 Range adjustment screw(for laser line)13 Blade guard 14 Knob (for bevel angle) 15 Hex wrench 16 Adjusting screw (forlower limit position)17 Adjusting bolt (for maxi-mum cutting capacity)18 Stopper arm 19 Lock lever (for turn base) 20 Releasing lever (for turnbase)21 Grip (for turn base) - - - - - -► Fig.31 Switch trigger 2 Lock-off button 3 Hole for padlock 4 Switch (for laser line)5 Hose (for dustextraction)6 Stopper pin (for carriageelevation)7 Guide fence (lowerfence)8 Guide fence (upperfence)9 Dust bag 10 0° adjusting bolt (forbevel angle)11 Bevel angle scale 12 Releasing lever (for 48°bevel angle)13 Latch lever (for bevelangle)14 Pointer (for bevel angle) 15 45° adjusting bolt (forbevel angle)- -INSTALLATIONInstalling the gripScrew the threaded shaft of the grip into the turn base.► Fig.4: 1. Grip 2. Turn baseInstalling the dust extraction hoseConnect the dust extraction hose to the tool asillustrated.Make sure that the elbow and the sleeve fit properly tothe ports of the tool.► Fig.5: 1. Dust extraction hose 2. Elbow 3. Sleeve4. PortBench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. While lowering thehandle slightly, pull the stopper pin and rotate it 90°.► Fig.6: 1. Locked position 2. Unlocked position3. Stopper pinThis tool should be bolted with four bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.► Fig.7: 1. BoltWARNING: Ensure that the tool will not moveon the supporting surface. Movement of the mitersaw on the supporting surface while cutting mayresult in loss of control and serious personal injury.FUNCTIONALDESCRIPTIONWARNING: Always be sure that the tool isswitched off and unplugged before adjusting orchecking function on the tool. Failure to switch offand unplug the tool may result in serious personalinjury from accidental start-up.Blade guard► Fig.8: 1. Blade guardWhen lowering the handle, the blade guard rises auto-matically. The guard is spring loaded so it returns toits original position when the cut is completed and thehandle is raised.