Makita LS1214FL Instruction Manual

Also see for LS1214: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

Contents

6INSTALLATIONBench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. Release the stopperpin by lowering the handle slightly and pulling thestopper pin.1001564This tool should be bolted with four bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.1001531FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Blade guard1002016When lowering the handle, the blade guard risesautomatically. The blade guard returns to its originalposition when the cut is completed and the handle israised. NEVER DEFEAT OR REMOVE THE BLADEGUARD OR THE SPRING WHICH ATTACHES TO THEGUARD.In the interest of your personal safety, always maintainthe blade guard in good condition. Any irregularoperation of the blade guard should be correctedimmediately. Check to assure spring loaded returnaction of guard. NEVER USE THE TOOL IF THEBLADE GUARD OR SPRING ARE DAMAGED, FAULTYOR REMOVED. DOING SO IS HIGHLY DANGEROUSAND CAN CAUSE SERIOUS PERSONAL INJURY.If the see-through blade guard becomes dirty, orsawdust adheres to it in such a way that the bladeand/or workpiece is no longer easily visible, unplug thesaw and clean the guard carefully with a damp cloth. Donot use solvents or any petroleum-based cleaners onthe plastic guard.If the blade guard is especially dirty and vision throughthe guard is impaired, use the supplied socket wrench toloosen the hex bolt holding the center cover. Loosen thehex bolt by turning it counterclockwise and raise theblade guard and center cover. With the blade guard sopositioned, cleaning can be more completely andefficiently accomplished. When cleaning is complete,reverse procedure above and secure bolt. Do notremove spring holding blade guard. If guard becomesdiscolored through age or UV light exposure, contact aMakita service center for a new guard. DO NOTDEFEAT OR REMOVE GUARD.1001782Positioning kerf board120015371. Knob2. Kerf board1. Blade guard1. Blade guard1. Bolt1. Stopper pin