Makita LXSL01 Instruction Manual

Also see for LXSL01: Instruction manual Instruction manual

Contents

531. NEVER stack workpieces on the table top tospeed cutting operations. Cut only one pieceat a time.32. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury. ENC007-6IMPORTANT SAFETYINSTRUCTIONSFOR BATTERY CARTRIDGE1. Before using battery cartridge, read allinstructions and cautionary markings on (1)battery charger, (2) battery, and (3) productusing battery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medicalattention right away. It may result in loss ofyour eyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with anyconductive material.(2) Avoid storing battery cartridge in acontainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large current flow,overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 ﾟ C (122 ﾟ F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in afire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.SAVE THESE INSTRUCTIONS.Tips for maintaining maximum battery life1. Charge the battery cartridge beforecompletely discharged.Always stop tool operation and charge thebattery cartridge when you notice less toolpower.2. Never recharge a fully charged batterycartridge.Overcharging shortens the battery servicelife.3. Charge the battery cartridge with roomtemperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).Let a hot battery cartridge cool down beforecharging it.INSTALLATIONBench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. Release the stopperpin by simultaneously applying a slight downwardpressure on the handle and pulling the stopper pin.1011300WARNING:• Ensure that the tool will not move on thesupporting surface. Movement of the miter sawon the supporting surface while cutting may resultin loss of control and serious personal injury.This tool should be bolted with two bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.1011236Turn the adjusting bolt clockwise or counterclockwise sothat it comes into a contact with the floor surface to keepthe tool stable.1. Bolt1. Stopper pin