Makita XSL03 Instruction Manual

Also see for XSL03: Instruction manual

Contents

10 ENGLISHINSTALLATIONInstalling the gripScrew the threaded shaft of the grip into the turn base.12► 1. Grip 2. Turn baseInstalling the dust extraction hoseConnect the dust extraction hose to the tool asillustrated.Make sure that the elbow and the sleeve fit properly tothe ports of the tool.12443► 1. Dust extraction hose 2. Elbow 3. Sleeve 4. PortBench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. While lowering thehandle slightly, pull the stopper pin and rotate it 90°.213► 1. Locked position 2. Unlocked position 3. StopperpinThis tool should be bolted with four bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.1► 1. BoltWARNING: Ensure that the tool will not moveon the supporting surface. Movement of the mitersaw on the supporting surface while cutting mayresult in loss of control and serious personal injury.