Makita XSL03 Instruction Manual

Also see for XSL03: Instruction manual

Contents

16 ENGLISH3. Match the pointer with your desired angle on thescale by moving the carriage then tighten the knob.12► 1. Bevel angle scale 2. PointerTo tilt the carriage to the right, tilt the carriage to the leftslightly and then tilt it to the right while pressing downthe releasing button.1► 1. Releasing buttonIf you perform a bevel cut greater than 45°, move thecarriage while sliding the releasing lever toward thefront of the tool. You can perform up to 48° bevel cut.1► 1. Releasing leverThis miter saw employs positive stop function. You canset 22.5° and 33.9° angle to both right and left quickly.Set the latch lever in the position as illustrated and tiltthe carriage. To change the angle, pull the latch leverand tilt the carriage.1► 1. Latch leverCAUTION: After changing the bevel angle,always secure the knob.Slide lockTo lock the sliding movement of the carriage, push thecarriage toward the guide fence until it stops. Pull thestopper pin and rotate it 90°.123► 1. Unlocked position 2. Locked position 3. Stopperpin