MuxLab 500112 Quick Installation Manual

Also see for 500112: Quick installation guide

Contents

MuxLab 500112 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000749-A SE-000749-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment PoE CCTV IPDevices PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to15.4 Watts.Transmission Transparent to the userStandard supported Ethernet side:IEEE 802.3 10BaseT,IEEE 802.3U 100Base-TXIEEE 802.3af compatible PoEPoE Power Class 3Connectors One (1) BNC 75 Ohms.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.LED Indicators Power, IP Traffic, 100MBpsMaximum Distance RG59/RG6: Up to 980 ft (300m) @ 100MbpsUTP Cat 5e/6: Up to 330 ft (100 m)Note: When installed in an electrically noisy environment, an STP cablemust be used. Also, cross-connection reduces the effective distancedepending on the grade of twisted cable used.RJ45 Pin ConfigurationReverse PolaritySensitive. Use EIA/TIA568A or 586B straight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Cable UTP/STP: One (1) Cat 5e/6 or better twisted pair cables requiredRG59/RG6: 75 Ohms (avoid CCS cable)PoE Power Supply(500113)Optional PoE Power Supply (110-240V/48VDC/.625A, 2.1mm plug)with inter-changeable blades (sold separately). Required at the CameraSide Device when coax cable quality or length results in insufficientpower reaching the camera. Required at the Network Side Devicewhen used with non-PoE LAN switch.Power Consumption Network Side: 1.82 Watt Camera Side: 1.73 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure MetalAccessories Wall-mount brackets includedDimensions 4.37” x 2.95” x 0.99” (110 x 75 x 25 mm)Weight 1.5 lb (0.68 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500112 LongReach CCTV IP PoE Extender Kit500113 Power Supply for 500112 (48VDC)LongReach CCTV IP PoE Extender Kit500112Quick Installation GuideOverviewThe LongReach CCTV IP PoE Extender Kit (500112) allows one IP camera (15.4Watts) to be connected up to 980 ft (300 m) via a single 75-ohm coax cable in a point-to-point configuration. The maximum distance depends on the grade and quality ofcoaxial cable. An optional PoE 48VDC Power Supply (500113) is available if required.ApplicationsCCTV IP surveillanceInstallation1. Identify the connectors on the Extenders as indicated on the product labels.2. Attach the surface-mount brackets if required as shown below.

/ 2

Related manuals for MuxLab 500112