N-Com R Series User Instructions And Safety

Also see for B601: Instructions

Contents

N-Com R Series User Instructions And Safety Manual pdf 15 page image

B60115goes through, and the selected number will be saved; at this point you will hear the special voiceannouncement confirming the selection (“Save Speed Dial 1” / “Save Speed Dial 2” / “Save SpeedDial 3”).You can also configure these setting through the program “N-Com EASYSET” orthrough an Android Smartphone, iPhone, iPad on which the “N-Com EASYSET”App has been installed.Using the stored numbersTo access the “Speed Dial” menu, press at the same time the “ON” and “n” keys (“Speed Dial”), thenuse the keys “” and “” to scroll through the menu items.Then press the “ON” key to confirm the selection of one of the following items:Last number redialSpeed Dial 1Speed Dial 2Speed Dial 3CancelledIf you wish to exit the “Speed Dial” menu, press the keys “” and “” until you hear the command“Cancelled”, then press “ON” to confirm.N.B.: If no key is pressed within 15 seconds, the system exits the “Speed Dial” menu.7.2. Conference call functionWhen a call comes in on a mobile phone connected via Bluetooth to B601, the intercom istemporarily turned off. However, if you wish to share the phone call with the other helmet, simplyturn on the intercom manually during the phone call.Turning on the phoneconference call functionDuring the phone call, briefly press “ON” (channel 1).During the phone call, press the “ON” key twice (channel 2).During the phone call, press the “ON” key three times (channel 3).Turning off the phoneconference call function During the phone call, briefly press “ON”.N.B.: “Telephone Conference” function can only be used with the N-Com series “900” and “600”.