N-Com R Series User Instructions And Safety

Also see for B601: Instructions

Contents

N-Com R Series User Instructions And Safety Manual pdf 16 page image

EN168. MANAGING TWO MOBILE PHONES (OR BLUETOOTH DEVICES)The B601 system can be hooked up to two phones (or Bluetooth) devices at the same time.The second phone (secondary device) can receive calls but not make them.To pair up the second Bluetooth phone (secondary device): Make sure the B601 is turned off. Put the system in the “Configuration” menu: press the “ON” key and keep it pressed for 4seconds, until you hear the voice announcement “Configuration”. Press the pushbutton “” until you reach the option “Second mobile phone pairing”. Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device. Select the N-Com system from the list. If a password is requested, enter the code 0000 (fourzeroes). After a few seconds, the connection between the two devices is activated.Once the Bluetooth device has been paired up, connection is automatic when the system is turnedon.9. SMART NAVI SYSTEMThe “SMART NAVI SYSTEM” function allows you to listen to navigator directions coming from thesmartphone even during an intercom call or while listening to the FM Radio.The audio stops to allow transmission of the navigator directions from the smartphone and isautomatically re-established at the end of said instructions.The “SMART NAVI SYSTEM” function is disabled by default on the device.You can enable / disable the function from the Configuration Menu (Chapter 5).N.B.: With the Smart Navi System enabled, all audio information coming from the smartphone (forexample, notification sounds) temporarily stops the audio under way.You can enable / disable the “SMART NAVI SYSTEM” function by using the N-Com EASYSET program or the N-Com EASYSET APP.10. MUSIC VIA BLUETOOTHTo pair up an Mp3 device to the B601 system, follow the procedure illustrated in Chapter 6.Play music (Play) Press “” and keep it pressed for about 2 seconds.Pause function (Pause) When the player is connected and playing music, press “” for 2about seconds.Next track (Skip) When the player is connected and playing music, press “” for 4about seconds.Previous track (Rew) When the player is playing music, press “” for 4 about seconds.