N-Com R Series User Instructions And Safety

Also see for B601: Instructions

Contents

N-Com R Series User Instructions And Safety Manual pdf 18 page image

EN18The Intercom connection with the selected channel is automatically activated at the end of the pair upprocedure.12.2. N-Com “900” / “600” Intercom function (one-to-one connection)To establish an Intercom connection with one of the systems stored in memory, simply press thecommand related to the channel where the system was saved.Connection CHANNEL 1 Briefly press “ON”.Call CHANNEL 2 Press the “ON” key twice.Call CHANNEL 3 Press the “ON” key three times.Disconnection of active intercom Briefly press “ON”.N.B.: In case the pre-setting position is empty, or the system being called cannot be reached withinthe maximum range or it is already engaged in a phone call, you will hear an error voice message.N.B.: In case the Intercom connection system falls outside the range (Intercom connectioninterrupted), the B601 system will automatically try to reconnect every 8 seconds. Double beeps willbe emitted until the Intercom connection is not restored.If you do not want automatic reconnection, press the “ON” key to stop the automatic reconnectionattempts.13. “UNIVERSAL INTERCOM” INTERCOMThe N-Com B601 system can be connected via Bluetooth to intercom systems of other brands or toN-Com systems other than the “900” / “600” series, thanks to the UNIVERSAL INTERCOM function.Important: N-Com systems other than the “900” / “600” series must be paired up to the N-Com B601by following the procedure “Pairing up the Universal Intercom”.13.1. Pairing up the UNIVERSAL INTERCOMThe N-Com system can be paired up to the other intercom (from now on referred to as Intercom B)as if it was a mobile phone. Make sure the B601 is turned off. Put the system in the “Configuration” mode: press the “ON” key and keep it pressed for 4seconds, until you hear the voice announcement “Configuration”. Press the pushbutton “” until you reach the option “Universal intercom pairing” mode. Put intercom B in the mobile phone pairing up mode (refer to the Intercom B manual). After a few seconds, Intercom B will emit the confirmation beep.N.B.: The system paired up using the UNIVERSAL INTERCOM is saved in the first available channel.13.2. Universal Intercom FunctionTo turn on and off the audio between two helmets, proceed as follows:From the N-Com B601 system: