Chapter 6 CONDUCTIVITY MEASUREMENT(F-54,55)6.4 Measurement Setting ChangeF-52, 53, 54, 55 976.4.4 ELectrode model changeThe electrode model, if input preliminarily,can be contained in the data printout(detailed) or the data memory.1. In the COND SETUP screen, pressor key and select the ELEC-TRODE MODEL option.2. Press the ENTER key.The ELECTRODE MODEL screenappears.3. Press , or , key tomove the cursor to the ELETRODEMODEL option.Pressing F2 will switch the ELECTRODEMODEL screen with the input screen.4. Determine the setting by theENTER key.5. Press F4 (RETURN).The set value is registered.To input the model name freelyPerform the following step instead of thestep 3 above to input the model name freely.1. Press F2 (OTHER).The input screen of the electrode modelappears.2. Press , and/or , keys,input appropriate letters/numericalkeys, and press the ENTER key.3. Determine the setting by F4(RETURN).The COND SETUP screen appears.4. Press F4 (RETURN).The input model is registered.
