Chapter 3 pH MEASUREMENT3.3 Changing the measurement setting conditionF-52, 53, 54, 55 413.3.4 Electrode model changeBy inputting the electrode model, the data printout (detailed) and/or data memory will containthe electrode model information.Select the electrode model to be used in the measurement.Maximum 9 alphabetical letters can be used to set the model name.Setting procedureModel selection1. In the pH SETUP screen, pressor key and move the cursor toELECTRODE MODEL field.2. Press the ENTER key.The ELECTRODE MODEL screenappears.3. Press , and/or , keysto move the cursor to the electrodemodel to be set.4. Press the ENTER key.The setting is determined.To input model name manually:Input the electrode model name.1. After finishing the above step 2.,press F2 (OTHER).The input screen of the electrodemodel appears.2. Press , and/or , keys,input appropriate letters/numericalkeys, and press ENTER key.Maximum 9 letters can be input.3. Determine the setting by F4(RETURN).4. Press F4 (RETURN).The setting is reflected, and the dis-play returns to the Measurementscreen.