Chapter 14 PRINTER14.4 Sample PrintoutF-52, 53, 54, 55 17714.4 Sample PrintoutThe data displayed here is the sample printout. The contents depend on the meter change/improvement.The printer also determines the printout image.14.4.1 When the ENTER key is pressed in the MeasurementmodepH Measurement modemV Measurement modeOperator name: max. 12 lettersTemperature compensationsettingAt Manual mode: MTCAt Auto mode: ATCMFG: max 7 lettersID#: max 12 lettersLot: max. 7 lettersElectrode model: max. 9EXACT printoutElectrode state:“OK”“CHECK”“ERROR”Sensitivity displayStandard solution value isdisplayedNo calibration/1-point calibration:None2-point calibration: 1st item3-point calibration: 2nd item4-point calibration: 3rd item5-point calibration: 4th itemWhen the data in the one con-firmed with AutoHold, “Stable”is shown.Nothing is displayed for theinstantaneous value measure-ment.Std.solution and potential:No cal data:“NO CAL DATA”Up to 5-point CALBRIEF printoutOperator name: max. 12 lettersMFG: max 7 lettersID#: max 12 lettersEXACT printoutWhen the data in the one con-firmed with AutoHold, “Stable” isshown.Nothing is displayed for theinstantaneous value measure-ment.BRIEF printout REL relative mV value
