16NH 2001M NBase CommunicationsVT100 Terminal SettingsUse the following settings when connecting the VT100 terminal or terminalemulator to the NH 2001M• Press the Setup key (identified on the screen’s prompt bar) and set theparameter values as follows:General Setup- VT100 Mode- Application KeypadCommunications Setup- 9600 (baud)- No Parity- 8 Data Bits, one Stop Bit- No Local Echo• Terminate the setup session by keying Ctrl-CConfiguring the SNMP AgentLogging into the Command Line InterfaceThe CLI is protected against usage by inappropriate personnel. To access theCLI the Network Administrator has to provide his name and a password.Please Loginusername: donpassword: (not echoed)As configured at the factory the password consists of a null string. To enterthe first time, just press Enter. Once you have logged into the CLI you maychange the password in order to avoid undesired access.AI2001SB.QXD 4/5/98 11:27 AM Page 16
